Heat Exchanger Gaskets, Plates & Spare Parts
Replacement heat exchanger plates and gaskets restore the heat-transfer surfaces and seals of an existing plate pack.

Replacement heat exchanger plates and gaskets restore the heat-transfer surfaces and seals of an existing plate pack. Gaskets sit in sealing grooves to seal and guide the flow channels; compatibility requires measured dimensions and verified port positions.
- Heat exchanger plates
- Gaskets
- PHE accessories
- Replacement parts
- · Plate / tube material
- · Design pressure & temperature
- · Connection type and size
- · Code and certification
Heat Exchanger Gaskets, Plates & Spare Parts Overview
Short answer
Replacement heat exchanger plates and gaskets restore the heat-transfer surfaces and seals of an existing plate pack. Gaskets sit in sealing grooves to seal and guide the flow channels; compatibility requires measured dimensions and verified port positions.
A replacement plate must reproduce the required channel geometry and sealing arrangement, while the gasket compound must suit the current process and cleaning environment.
Replacement selection starts with nameplate information and plate or gasket photographs or a sample, followed by measured dimensions, centre distances, material, quantity and current operating conditions.
Choose the gasket compound from medium, temperature, pressure and cleaning chemistry. Confirm plate dimensions, port centres, compression pitch and sealing groove before quotation or installation; compatibility is confirmed for the individual order.
Send a nameplate photograph, plate-pattern photographs or a sample and measured dimensions to confirm the required replacement.
Operating Conditions
The 3–500 m² range covers maximum assembly areas for replacement-plate configurations. Fit is confirmed from the plate pattern, dimensions, port centres, compression pitch, sealing groove and channel arrangement. Design pressure and temperature are confirmed for the selected construction and duty.
| Pressure and temperature | Confirmed per project from the media, duty, materials and selected construction |
| Corrugation depth | 2–4 mm |
| Listed maximum assembly areas | 3–500 m² |
| Compressed plate pitch | 2.5–4.5 mm |
| Plate dimensions (length × width × thickness) | 429 × 125 × 0.5 to 2246 × 746 × 0.5 mm |
| Port centre distances | 357 × 60 to 1939 × 439 mm |
| Flow-channel cross-sectional area | 0.000242–0.002766 m² |
Materials of Construction
| Plates | SS304, SS316L, SS316Ti, 904L, 254 SMO, Hastelloy, titanium |
| Gaskets | NBR, HNBR, EPDM, EPDM-HT, FKM/Viton |
Choose this when / Do not choose this when
A quick suitability check before you commit to a construction.
Choose this construction when
- Worn or damaged plates or gaskets need replacement in an existing plate pack.
- Nameplate and plate-pattern photographs or a sample, measured dimensions and quantities are available.
- Replacement materials need to be reviewed against the current media and cleaning conditions.
Do not choose this construction when
- Direct fit is expected from an equipment name or a few dimensions without verifying the pattern and port centres.
- The plate pattern, sealing groove and critical dimensions cannot be identified.
- The proposed plate or gasket material is incompatible with the media, temperature, pressure or cleaning chemistry.
Selection Parameters
Information our engineering team uses to size and quote this unit.
- Nameplate photograph and equipment identification
- Plate and gasket photographs or a sample showing the plate pattern and sealing groove
- Measured plate dimensions, port centre distances, compressed plate pitch and required quantities
- Existing and required plate and gasket materials
- Media, temperatures, pressures and cleaning chemistry for the current duty
- Flow rates, heat duty and any changes to channel or connection requirements
RFQ Data Checklist
Send the items below with your inquiry for the fastest accurate quotation.
- Nameplate photograph and equipment identification
- Plate-pattern and gasket photographs or a sample, including the sealing groove
- Measured plate dimensions, port centre distances and compressed plate pitch
- Plate and gasket materials and the required quantity of each
- Media, operating and design temperatures, pressures and cleaning chemistry
- Current flow rates, heat duty and any changed operating requirements
Procurement and selection dimensions
The dimensions that decide the configuration, and what each one changes in the quotation.
Starts the replacement identification and order review
Checks channel geometry and sealing arrangement
Confirms physical fit and the replacement scope
Matches corrosion resistance and sealing to the current duty
Determines material compatibility
Confirms that the replacement suits the present operation
Heat Exchanger Gaskets, Plates & Spare Parts Industry Applications
Replacement selection uses nameplate information, a plate or gasket photograph or sample, measured plate dimensions, centre distances, material and the current process and cleaning conditions. No universal fit is assumed.
Frequently Asked Questions
Related industries
Other products
Related Guides
Sourcing, verification and next steps
Every unit is engineered to the confirmed duty, materials and inspection scope of the order. Design codes, test certificates and third-party inspection are quoted as options and confirmed per project rather than assumed. See our heat exchanger manufacturing and OEM capability, the quality control and inspection workflow, and the heat exchanger cost guide for what drives price. For a first-pass thermal check, use the heat exchanger sizing calculator, then send your process data for a quotation.
Need a Heat Exchanger for Your Project?
Send your working conditions, drawing or datasheet. Blair will review your request and help confirm the next step.